How I learned to type the Neo2 keyboard layout: a review after the first 1.5 years

neo-iconA couple of years back, I was asking myself: should I switch my keyboard layout to a more effective one? If yes, which new layout should I learn? For obvious reasons I searched for reports of people that did such a switch before. And this is why I try to give such a report myself now, after typing Neo2 for about 1.5 years – which seems to be a good point for summarizing my success story with Neo2 so far.

But first: some details about my typing characteristics before I learned typing the Neo2 layout. I…

  • …was “successfully” using the German QWERTZ keyboard layout for something like 12 years with a 10-finger-system.
  • …was typing with somewhere around 450 characters per minute for normal text.
    …did software development for a living and especially disliked the access to special characters my back-then keyboard layout.
  • …didn’t like the idea of using an ineffective keyboard layout in general. The layout I was using back then was a) not optimized for today’s hardware and b) I used it all day as it is the number 1 tool used in my profession, so investing in improvements should really pay off on the long run.

Overview of alternative keyboard layouts

There are (and were back in the day) many alternatives to the layout I used. For some examples, see e.g.:

I looked a bit into heuristically optimized keyboard layouts. Some of them use the same higher layers as Neo2 and just have layer 1 and 2 rearranged heuristically, such as the bone layout (German: Why didn’t I chose such a layout? Those had/still have less support, as they are not used so widely. This brings additional effort when configuring/using different PCs/hardware.

Additionally, for something so important for me and my daily business I preferred to use something already proven to work well, and would therefore bring less problems with it.

Why use Neo2 instead of other alternatives?

Neo was designed back in 2004 and was optimized for the German language. Due to German being very similar to English from key frequency point of view the “being optimized to German” did not make a big difference to me (and still does not make any, you can rest assured that it’s very comfortable to type English with it). Neo2 has a very good heatmap (optimized for key position and typing interleaving with left/right keys:


Though there are arrangements that are a little more effective and further optimized (e.g. heuristically),  when it comes to key frequencies, having such a heatmap still is an amazing thing.

To me, even more important was that access to special characters is solved very cleverly with Neo2. There are 6 layers in total:

  • Layer 1+2 are lower and upper case characters – those are the ones you are probably used to on your keyboard. The “modifier” keys are the Shift keys.
  • Layer 3 are special characters (right below your fingers, e.g. in the home row!). The “modifier” keys are the CapsLock button on the left side and the “#” key on the right side.
  • Layer 4 are other special characters and special keys
  • Layer 5+6 are Greek letters.

The special characters on layer 3 make accessing special characters for programming very easy. And layer 4 is something that is easily underestimated: it features:

  • Keys to control cursor position like up/down/left/right, page up/down, delete left/right, home/end, escape, tab, enter, etc. – all under your left hand.
  • All numbers in the form of a keypad – all under your right hand.

From this point of view, Neo2 is more effective for programmers than e.g. Dvorak, Colemak, or similar keyboard layouts (still, those are pretty cool too). But besides the Neo2 layout having a lively community and already being proven to working well, this was the main reason for learning Neo2 instead of any other layout.

Learning and switching to Neo2

How not to do it

Maybe 3 years before I already had tried Neo2 – for very short time. Back then I set my goal similar to “I want to type in Neo!”, printed a Neo2 layout onto an A4 sheet of paper, switched my keyboard layout to Neo2 and just started typing it. In short: it did no work out. I had to search for every key using the printout, and of course got frustrated over the extremely low speed of typing (which was to be expected) very fast – and quit within hours.

How to do it

After the first try, the goal of switching keyboard layout remained. I wanted to use a more effective keyboard layout/Neo2 someday, as it would just be so much more effective for my everyday usage. The second time (maybe 2 years after the first try) I was better prepared to really perform a switch:

  1. I used KTouch with Neo2 to train single keys – one after another (the KTouch “beginner mode”). I did this is my free time, at work I continued to use my QWERTZ layout. Further, I made sure that I typed all keys with the correct fingers (I had had a slight mash-up with the QWERTZ layout before).
  2. In KTouch I used standard settings, which are minimum 180 chars per minute and 98% accuracy to pass each lesson and unlock the next one. This ensures you don’t try to learn  too much at once, which was the problem with my first try.
  3. Using KTouch I trained about 1/3 of the Neo2 lessons provided. Those were all about introducing and training new character keys. It was no problem to write with my QWERTZ layout at work at the time (switching was smooth).
  4. After finishing about 1/3 of the Neo2-lessons provided with KTouch (within 1.5 months as far as I remember), I did the “all in” thing: I switched all my layouts to Neo2 and typed all texts with it. This included my keyboard at work as well as e.g. my on-screen keyboard on my mobile phone. Of course it was very slow at the beginning again (first few days), but now I learned very fast. After about 2 to 3 weeks of typing, my speed was OK, while I was still learning at a fast rate without requiring any extra training time. This was when typing the old QWERTZ layout became more difficult for me.
  5. Since then I’ve just continued to write Neo2. Once in a while I did some more lessons in KTouch – but these were just for training and comparing typing speeds. But overall, using a typing trainer like KTouch definitely was the “enabler” of learning a new keyboard layout for me.

Progress report after the first 1.5 years

I started learning Neo2 around end of February 2015. Within about 1.5 months (after successfully completing about 1/3 of the lessons in KTouch) I made the “all in” move and switched all my layouts to Neo2. My progress since then:

  • Mid of April (~2 months): about 190 chars/min, 95.5% accuracy in the 1000 English words test from KTouch Neo2.
  • End of April: feeling more comfortable every day.
  • Mid of May (~3 months): about 250 chars/min, 95.5% accuracy in the German/English words test from KTouch Neo2.
  • Mid of June (~4 months): 286 char/min, 98.5% accuracy (09:02 in the “repeat many words test” in KTouch Neo2).
  • End of September (~7.5 months): 286 char/min, 96.3% accuracy (21:13 in the 1000 most frequently used English words test in KTouch Neo2) and 289 char/min, 97.2% accuracy (08:57 in the “repeat many words test” in KTouch Neo2).
  • Beginning of February (~1 year): 337 char/min, 96.8% accuracy (6:50 in the KTouch Neo2 train comma lesson).
  • Mid of February 2016 (~1 year): 330 char/min, 97.2% accuracy (18:20 in the 1000 most frequently used English words test in KTouch Neo2) and 311 char/min, 96.4% accuracy (8:20 in the KTouch Neo2 “repeat many words test”).
  • April 2016 ~1 year 2 months: 318 chars/min with 97.2 accuracy with the KTouch Neo2 congratulation text for finishing Neo2 training. Programming: 241char/min with 96.5% accuracy in KTouch Neo2 shell text (special characters, numbers, …). This pretty much is what I wanted in the beginning – it made me writing code on my keyboard more effectively. Additionally: have the feeling that I need to think less about how I do things, and more about what I want do to. Specially the position keys under left hand at level 4 (move cursor up/down/left/right, page up/down, delete left right, home/end) have proven extremely effective – much more than I initially thought – to quickly move the cursor around when programming.
  • July 2016 ~1 years 5 moths: 333 chars/min with 98.0% accuracy (18:09 in the 1000 most frequently used English words test in KTouch Neo2).

This is an example of how your progress for learning Neo2 in KTouch could look like:

  • Left: progress for one single lesson: usually, you will always increase in speed and accuracy when repeating the same lesson (which is why you are able to learn a new keyboard layout relatively fast if you take it seriously).
  • Right: progress for different/all lessons: usually, you increase in speed and accuracy for a specific lesson, and when you move on to the next lesson your speed and accuracy will be lower for it at the beginning – which is because you are just learning completely new things there. I can scroll far to the left in this view – and it’s a good feeling to see speed and accuracy continuously increasing over time there 😉





The final (and frequently asked) questions

Is my typing speed still increasing? Yes, definitely. Was it worth the effort? Would I do it again? Yes, definitely, to both. Though, at the moment I’m still a bit slower in typing regular texts than I was before, programming is definitely faster already. Typing feels less cumbersome: especially complex combinations of symbols/characters are easier to type, and I don’t need to move my right hand anymore for reaching e.g. arrow keys, delete/insert, or similar. Besides making a large number small tasks a little faster (which sums up to a lot in the end), this also just feels more satisfactory.

So, bottom line: in my opinion, especially when your job involves something like programming, learning Neo2 really pays off in the end.

2 thoughts on “How I learned to type the Neo2 keyboard layout: a review after the first 1.5 years

  1. Thanks for the nice report. For me it’s pretty much the same as for you, doing software development and want to switch to Neo2. I have completed the first 3 lesson in Ktouch and I really like it. Reading your article I think I will also do a test with the QWERTZ layout do have a comparison in regards of typing speed. A question at the end: do you know any way to get the Neo2 layout in iOS? I am pretty sure there are plenty of keyboards for Android but I haven’t found one for iOS.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s